Fetal cells and DNA in maternal blood

Although fetal cells have been known to escape to the maternal circulation for a number of years, research attempts to use them for prenatal diagnosis have not had any consistent success. This review attempts to trace the history of such attempts and to document their progress and reasons for success or failure. The opinions of recent conferences including that of the US National Institute of Child Health and Human Development, a sponsor of major US research in the field, are reported and discussed. It is concluded that although basic work has demonstrated the biologic availability of both fetal cells and their free DNA representatives in the maternal circulation at gestational ages relevant to prenatal diagnosis, much work remains to develop practical technology for their consistent recovery and assay. Copyright © 2003 John Wiley & Sons, Ltd.     

EMMC process for combined removal of organics, nitrogen and an odor producing substance

In order to improve the process performance regarding the removal of organics, nitrogen, and an odor-causing compound (sulfide) contained in domestic wastewater, an entrapped-mixed-microbial cell (EMMC) with and without humic substances for both fixed and moving carrier reactors and conventional suspended growth culture (i.e. conventional activated sludge process) were investigated simultaneously. Both synthetic (simulated to the organics concentration of general domestic sewage) and actual domestic wastewater were investigated under operational conditions of 12 h of hydraulic retention time (HRT) with 1 h of aeration and 1 h of non-aeration, and 6 h of HRT with continuous aeration, at a room temperature of 25 +/- 2 degrees C. It was found that entrapping humic substances in the EMMC carriers had no impact on the removal of organics, nitrogen, and the odor-producing compound. Additionally, the performance of the EMMC moving carrier system for the removal of these pollutants is similar to that of the EMMC fixed carrier system. In general, the EMMC associated systems which provide high solids retention time achieve a better removal of chemical oxygen demand (COD), nitrogen, and the odor-producing substance than the suspended growth system for both HRTs of 6 h (continuous aeration) and 12 h (1 h of aeration and 1 h of non-aeration). Both the fixed and moving carrier EMMC processes, therefore, have the potential for improvement or replacement of the existing conventional activated sludge process with regard to improving the effluent qualities (such as COD, nitrogen and odor-producing compound) for reuse/disposal.     

火灾中双层窗玻璃破裂机理的研究

把单层窗玻璃破裂的模型作为研究基础,基于原有的单层窗玻璃破裂的计算软件开发设计了双层窗玻璃破裂的模型,并对双层玻璃的内表面及其空隙的热传递过程和连续发生的玻璃破裂机理进行了研究。     

Cultured human-cell-based bioassay for environmental risk management

Among bioassays for evaluating various impacts of chemicalson humans and ecosystems, those based on culturedmammalian-cells can best predict acute lethal toxicity to humans. Weexpect them to be employed in the future in environmentalrisk management alongside mutagenicity tests and endocrine-disrupting activity tests. We recently developed adisposable bioassay device that immobilizes humanhepatocarcinoma cells in a small micropipette tip. Thisenables very quick (within 2 h) evaluation of acute lethaltoxicity to humans. For bioassay-based environmentalmanagement, 2 promising approaches have been demonstrated bythe US-EPA: toxicity identification evaluation (TIE) andtoxicity reduction evaluation (TRE). The Japanese Ministryof Environment has been supporting a multi-center validationproject, aimed at assembling a bioassay database. To makefull use of these resources, we present a numerical modelthat describes contribution of individual chemical toobserved toxicity. This will allow the selection of the mosteffective countermeasure to reduce the toxicity. Bioassay-based environmental risk management works retrospectively,whereas impact assessment using substance flow models andtoxicity databases works prospective. We expect that these 2approaches will exchange information, act complementarily,and work effectively in keeping our environment healthy inthe 21st century.     

基于设备网(DeviceNet)总线技术的矿井瓦斯传感器的设计

介绍瓦斯传感器的国内外研究现状,给出以设备网(DeviceNet)总线构成的瓦斯传感器检测网络结构。简要分析了DeviceNet总线协议特点以及其关键技术,提出具有DeviceNet总线规范的矿井瓦斯传感器的设计及实现方案。硬件电路主要由信号调理电路、数字信号处理器,以及能实现DeviceNet网络通信的接口电路构成,用对象建模的方法构建了矿井瓦斯传感器的对象模型,并用模块化编程技术实现了矿井瓦斯传感器作为一个网络从设备的应用层的软件设计。该传感器作为从设备和带有PCI-CAN网卡的计算机组成主/从连接网络,能对多个矿井瓦斯传感器的数据实现远距离的控制。     

Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.     

An impingement plate method to detect deposits of pyrethroid insecticides

Abstract

A silica gel impingement plate for monitoring pyrethroid deposits in environmentally sensitive areas is described. The plate is simple, commercially available, and inexpensive. A residue analysis method is given for deltamethrin deposits with 83.3% mean recovery and a minimum quantifiable limit of 0.005 μg/plate. Pyrethroid deposits are strongly adsorbed to the silica gel, which prevents wash‐off by rainfall and slows photodegradation. In two field experiments, deltamethrin was readily detected 3 weeks after direct spray applications at 6 and 10 g ai/ha. Deltamethrin dissipation on the plates was first‐order with a half‐life of 2.9 ‐ 3.7 d. Photoisomers of deltamethrin were also detected on the plates and the ratio of photoisomers to deltamethrin increased over time. This ratio will indicate the age of deposits in monitoring situations.     

武汉城市圈空间结构演化及影响研究

武汉城市圈是我国资源节约型、环境友好型社会建设的重点示范区，是中部崛起战略实施的重要支点。但就现阶段的发展情况来看，武汉城市圈在空间结构方面存在一些问题，制约了城市圈的总体发展。采用两方面的方法对武汉城市圈的空间结构展开研究。一方面，利用数理分析确定武汉城市圈的城市职能等级体系；另一方面，利用针对历史建成区的图面分析和方格网分析确定城市圈空间结构的演化历程。结合两方面的研究结论，将武汉城市圈的空间结构确定为单核模式，即由一个较大的核心城市和若干个组团城市结合而成的空间结构模式。单核模式有利于培育强有力的核心城市，突出核心城市的辐射带动作用，但不利于组团城市的扩张和城市圈的总体长远发展。在此基础上，提出了优化武汉城市圈空间结构的初步设想，包括联合一些组团城市建设发展中心，突出一些组团城市特色功能等     

钠盐量影响下DD6单晶高温合金的高温热腐蚀规律研究

目的 开展镍基单晶高温合金DD6在950 ℃下的热盐腐蚀试验(95%Na2SO4+5%NaCl)，探明涂盐量和涂盐方式(周期涂盐和单次涂盐)对DD6高温热腐蚀的影响规律和机理。方法 结合扫描电子显微镜、X射线能量色散谱、X射线衍射等设备，对不同涂盐量及涂盐方式下DD6的表面及横截面形貌进行观察分析，分析不同涂盐量和涂盐方式下DD6的高温热腐蚀机理。结果 DD6在950 ℃下主要发生碱性熔融热腐蚀，同时伴随氧化、硫化和氯化等过程。高温热腐蚀使得DD6合金表面生成的保护性氧化膜被熔融态的腐蚀介质破坏，导致O、S、Cl等外部元素通过氧化膜的缺陷进入DD6基体中，在合金的亚表面发生内氧化、内硫化以及内氯化反应，横截面上出现明显的腐蚀层，其主要由氧化物以及硫化物组成。随着热腐蚀的进行，DD6表面物质发生了剥蚀，沉积盐量的增加导致剥蚀现象越加严重，合金内部致密的组织结构也被破坏，横截面上出现了大量孔洞、裂纹等缺陷。在相同涂盐量下，周期涂盐法使得DD6的腐蚀程度高于单次涂盐法。结论 DD6高温热腐蚀行为与涂盐量及涂盐方式密切相关，相同涂盐方式下，涂盐量越大，DD6热腐蚀更加严重。涂盐量一定时，周期涂盐法使得DD6的热腐蚀剧烈程度大于单次涂盐法，且DD6在上述热腐蚀条件下均发生剥蚀破坏。